Maintenance
-
Welding repair of the bucket body and bucket teeth of the WY25 excavator
1. Bucket material and its weldabilityThe bucket body material of the WY25 excav
-
Common faults of FL460 type loader with torque and speed change
The main causes of such malfunctions are as follows:(1) The hydraulic transmissi
-
The reasons for the weak lifting capacity of the paver and the failure of the hopper to close
1. The ironing board is too weak to lift or even cannot lift at allAfter inspect
-
A Brief Analysis of the Slipping Phenomenon of Single Steel Wheel Vibratory Rollers in Deserts
With the in-depth development of the western region and the increase in national
-
A Brief Analysis of Hydraulic Fault Handling in Garbage Trucks
First, the compression mechanism cannot generate sufficient payload1. Check whet
-
Application Research on Nitriding Process
Key words: Nitriding, workpiece distortion, surface treatmentAbstract: Compared
-
Discussion on Thermal Balance of Loader Power System
I. Thermal Balance of a Single diesel Engine1. The heat distribution emitted by
-
Design Principles and Calculation Examples of Loader Shock Absorbers
Abstract: This paper briefly describes the hazards of vibration and noise in con
-
Analysis of Noise Mechanism in Loader Power Transmission System
Abstract: In view of the specific situation of wheel loaders, the mechanism of n
-
The application of intelligent control technology in construction machinery products
I. Overview of Intelligent Control TechnologyControl technology developed after
-
The influence of brake fluid on the braking performance of wheel loaders
I. IntroductionIn recent years, the faults of the braking system of loaders have
-
Common Fault Maintenance of HBT60 Concrete Pump
As a mature concrete construction machinery, the HBT60 concrete pump has been wi
-
Discussion on the Maintenance and Repair of Hydraulic Systems in Loaders
Abstract: The application of hydraulic technology in loaders is becoming increas
-
The handling of the automatic forward tilt of the loader's bucket
one Fault phenomenon: A loader of a certain company suddenly experienced weak op
-
Analysis of the Reasons for the Difficulty in Disassembling the Tie Rod Pin Shaft of Rotary Drilling
Key words: Disassembly of the drill mast of rotary drilling rig, structural impr