Let's talk about the features and precautions of the combined lawn mowing and flattening machine

Product Introduction

This machine has a working width of up to 10.7 meters and can provide excellent harvesting performance. CLAAS 'model DISCO 1100 holds the current world record, having harvested over 2,000 mu of alfalfa in just 8 hours! All DISCO series combined lawn mowers are equipped with CLAAS 'proven MAX CUT cutter and a variety of other functions. This will be a wise choice for large-scale farmers and contractors with high performance and excellent harvest quality requirements.

Its operational efficiency currently holds the world record for alfalfa cutting.

● MAX CUT cutter, with a one-piece knife holder and fixed by bolts, provides excellent harvesting quality and reliability.

● SAFETY LINK safety connection module: In the event of a collision, the module will shear at the predetermined breaking point to protect the transmission system.

After the harvesting operation is completed, the tractor can be attached to other farm tools for operation, which has more uses and lower operating costs.

Notes

Before the lawn mower cuts the grass, it is necessary to clear the debris in the mowing area first to avoid damaging the grass cutter head and blades. When starting the engine in a cold state, first close the air damper, adjust the throttle to the highest point, and then open the air damper at the right time after starting. If the area of the lawn is too large, the continuous working time of the lawn mower should not exceed 4 hours.

After using the lawn mower, it should be thoroughly cleaned, and all screws should be checked to ensure they are tightened, the blades are undamaged, and the high-pressure cap should be inspected and repaired. Additionally, depending on the service life of the lawn mower, the inspection or replacement of vulnerable parts should be strengthened.

3. Remove the spark plugs and clean the carbon deposits.

4. Inspect the fuel filter and clean the fuel tank. Drain the engine fuel, remove the filter and gently clean it. Remove the moisture and dirt adhering to the fuel tank.

5. Check the radiator through the engine hood to see if it is dirty. If it is, clean it thoroughly.

6. Check the fuel pipe. If it is aged or leaking, replace it in time.

7. Replace the blade in time.