Some measures for maintaining excavators in summer

First of all, in this rainy season, we don't know when it will rain heavily. If we have experienced a rain, to prevent the erosion of rainwater, we should clean it in time to keep all the components dry.

Nowadays, the environment is getting worse and worse, and pollution is becoming more and more serious. As a result, the acidic products contained in the rainwater are much stronger than before. The corrosive effect of acidic rainwater on excavators is also not to be underestimated. This corrosiveness will gradually cause damage to the paint surface and components of the excavator. Therefore, it is best to carry out a repair on the paint surface of the excavator in summer. It is very simple to only trim the paint surface. Just apply waxing or glaze sealing.

When many customers purchase second-hand excavators, they will check the chassis. This is because the chassis is the part closest to the ground. The quality of a chassis can reflect the usage of an excavator. Moreover, the maintenance cost of the chassis is also quite high. In the rainy summer, the chassis is most prone to rust and may even have perforations. Therefore, it is essential to pay attention to the cleaning of the excavator chassis. Carry out anti-rust treatment once regularly.

In winter, we often encounter the problem that the engine is difficult to start. In fact, this situation also occurs frequently on rainy days in summer. Sometimes, even if it can be started with difficulty, the machine still appears weak when doing work. This problem is mostly caused by the dampness brought by the rain, which leads to the loss of the normal ignition function of the machine. If it is found that the poor ignition and the decline in engine performance are caused by the dampness of the ignition system, it is best to first dry the inside and outside of the distributor plate and the wires with a dry paper towel or dry cloth. Then, use a special desiccant spray can to spray desiccant on the distributor plate cover, battery joints, circuit joints, high-voltage lines and other places. After a while, the engine can be started.

In fact, the maintenance of excavators is not that complicated or difficult. The key lies in whether the owner has the execution ability and is meticulous enough. The degree of maintenance of the machine can reflect the quality of the operator. In the second-hand excavator market of Yumao, some machines are not much worse than new ones. This is all due to the maintenance level of the operator on a regular basis. Good maintenance not only increases the service life of the vehicle It can also enhance the working efficiency of excavators and bring greater benefits to the operators.