Maintenance
Internal data on crane maintenance
1. Drainage of the engine diesel filter element
Explanation
Drain the engine fuel filter element at least once a week.
Operation mode
Step 1: Place an oil pan under the diesel filter element and loosen the drain valve of the diesel filter element counterclockwise by hand.
Step 2: After the water has been drained completely, tighten the bolts of the diesel filter element drain valve in sequence.
2. Replacement of the engine diesel filter element
Explanation
Replace the engine fuel filter element at least once a year.
Operation mode
Step 1: Place an oil pan under the diesel filter element and remove the diesel filter element with a special tool.
Step 2: Apply a thin layer of lubricating oil on the surface of the new diesel filter element gasket, then install the diesel filter element with a special tool and tighten it.
Step 3: Loosen the exhaust screw of the fuel filter element, press the hand fuel pump until no fuel without foam is discharged.
Step 4: Tighten the exhaust screw.
Related articles
- Contamination and Prevention of Internal Combustion Engine Lubricating Oil
- Sany Heavy Industry: 12-ton entry-level Crane! Claiming to recoup the investment in just over two ye
- Solutions to the failure of safe unloading of crawler cranes
- Four major upgrades are full of highlights: Zoomlion's intelligent high-rise crane ZA16NJE-V's artic
- Emergency handling of the rotary jumping fault of DMQ540/30BI Elevated Gantry Crane
- Why does Sany's 130-ton truck crane insist on single-engine operation?
- Sany Heavy Industry: Crane, crane, how does SAC7500C7-8 "rescue" the trapped 130 tons
- Twelve Liugong truck cranes have been delivered!
- The Fangyuan PT6012 tower crane has successfully passed the inspection
- Analysis and Elimination of Oil Leakage in Crane Horizontal Hydraulic Cylinders