The use and maintenance of riding lawn mowers

Start and Stop: Before starting, make sure the fuel is full and check if the engine oil, air filter, etc. are functioning properly. Place the switch in the start position and gently pull the start rope to start it. After completing the pruning work, turn off the throttle, place the switch in the off position, disconnect the power supply, clean the machine and store it properly.

Precautions for operation: Adjust the machine according to the length and height of the lawn, maintaining a stable speed and an appropriate trimming height. When turning, first reduce the speed, turn slowly, and then accelerate back to the original speed after completion. When operating, appropriate protective equipment should be worn, such as safety helmets, gloves, goggles, etc. Avoid using it in bad weather, such as strong winds, rain, fog, etc.

Daily maintenance: After each use, clean the weeds, soil and debris on the surface of the machine, and check whether the blades, chains, bearings and other vulnerable parts are normal. Replace them in time if any wear or damage is found. Regularly apply lubricating oil to the chain, bearings and other parts to ensure smooth operation of the machinery.

Regular maintenance: Regularly inspect and adjust the tightness of the chain to ensure stable transmission and extend its service life. Depending on the condition of the lawn and the degree of blade wear, replace the blade every 200 to 300 hours. Regularly clean the air filter and fuel filter to prevent clogging and wear