How to clean and maintain a lawn mower to extend its service life

Regular cleaning: Remove grass debris after each use to prevent wet grass from corroding metal parts. Clean the heat sink every month to prevent dust from clogging and causing a 60% drop in heat dissipation efficiency.

Correct usage: Avoid continuous operation for more than one hour. It is recommended to stop the machine for 5 minutes every 30 minutes. When replacing nylon ropes, the diameter should be matched. Wires that are too thick will increase the load on the motor and shorten its lifespan.

Consumable replacement: Regularly inspect and replace consumables such as engine oil and air filters to ensure the good performance of the equipment.

Storage and moisture-proofing: When storing, pay attention to moisture-proofing to prevent the machine from rusting or getting damaged.

Avoid common mistakes: Wrap the nylon rope correctly to prevent reverse winding which may cause poor wire supply. Mix the engine oil strictly in proportion to prevent cylinder pulling. The blade should be replaced in time after passivation to avoid increasing vibration and shortening the bearing life