Let's talk about the mango remover

Working principle

The mango remover mainly removes the thorns on crops through the continuous stirring and friction of the low-speed rotating screw rod of the main shaft and the stationary screw rod on the cylinder wall. The Angle of the lever, the degree of filling inside the cylinder and the friction force can all be adjusted to adapt to the characteristics of different crops and achieve the best mango removal effect.

Main uses

The awning machine is mainly used for the pre-treatment before the selection and processing of awning crops such as wheat, rice and oats, to prevent the screen holes from clogging and improve the impurity removal effect of the selection machine. At the same time, it can also be used to remove the mud stains on the surface of soybeans and polish other grains such as corn.

Operation and Maintenance

Operation

Before using the edge remover, one should carefully read the user manual to understand the structure, performance and usage method of the machine.

2. Install and debug in accordance with the requirements of the manual to ensure the normal operation of the machine.

During the operation, it is necessary to pay attention to observing the running condition of the machine and adjust the Angle of the driving rod and the friction force inside the cylinder in a timely manner.

Maintenance

Regularly clean and maintain the mango remover to remove dust and debris from it.

2. Check if the fasteners of the machine are loose. If any are loose, tighten them in time.

3. Check the wear and tear of the machine. If there are any severely worn parts, they should be replaced in time.