The usage method of the snow blower

Preparations: Before using the snow blower, it is essential to ensure that the correct engine type (two-stroke or four-stroke) is selected and the corresponding fuel is used. Two-stroke snow blowers use mixed fuel (a mixture of two-stroke engine oil and gasoline), while four-stroke snow blowers use gasoline as fuel. An appropriate amount of four-stroke engine oil must be added to the oil tank.

Check the circuit: Make sure the circuit is correctly connected and turn on the circuit switch.

Check the dampers: Before starting the snow blower, the dampers should be closed. This is because during the start-up process, the closed choke can help the engine start more easily.

Pumping oil: Pumping oil is an important step in starting a snow blower. By pumping oil, it can be ensured that there is sufficient fuel supply in the fuel system, which is conducive to starting.

Pull the starter: Continuously and rapidly pull the start handle until the engine starts. After starting, open the choke door and let the snow blower run at idle speed for a few minutes before commencing the snow-blowing operation