A Brief Discussion on the Generous Bundle

This machine is equipped with a heavy-duty picker that has been verified by JAGUAR silage machines. The forced feeding system, upgraded and optimized baling room, automatic baling pressure control system, advanced short linear transmission design and interactive overload protection, central automatic lubrication system, as well as optimized operation terminals, etc., ensure smooth operation, excellent reliability and comfort. This advanced square baler produces extremely square bales with high baling density and a quick return on investment. Coupled with CLAAS's century-old market-proven knotting system, there is no residual baling rope. It is favored by an increasing number of users, large farmers and cooperatives.

● Forced feeding system, less likely to cause feeding blockage.

The advanced CLAAS 5300RC large bundle features an extended baling chamber, providing greater baling density and a higher baling success rate.

The new APC 2.0 automatic baling pressure control system ensures more uniform baling density and greater baling density.

The weight of the new flywheel has increased by 28%, and the inertial reserve has risen by 44%, reducing the peak load of the tractor, saving fuel and enhancing comfort.

The JAGUAR heavy-duty picker is selected, with a width of 2.35 meters. Five rows of spring teeth are arranged on the U-shaped main beam. The whole machine operates smoothly, has high reliability and a longer service life.

The CLAAS electronically controlled central lubrication system can adjust the lubrication time interval and dosage as needed. It has excellent reliability, low daily maintenance requirements and reduces maintenance costs.

The entire machine has only two chains. The main power transmission relies on the drive shaft, gearbox and overload clutches distributed throughout each transmission system, which ensures excellent transmission reliability of the entire machine.

The APC2.0 automatic baling pressure control system can automatically adjust the baling pressure according to the type of crop and the feeding amount.

Front-mounted straw chopper (optional) : Equipped with 178 knives, the standard cutting quality results in standard bales with an additional 20% weight increase

Hay bale palletizer (optional) : It can collect and stack 3 square bales of 90 cm or 4 square bales of 70 cm at a time, saving up to 75% of the hay bale collection time.